A set of four Alard violin pegs in their thin variant form, produced in Mountain Mahogany wood. This set of pegs are cut with 23mm diameter heads and have an 8.6mm diameter under the collar.
An “Alard” model tailpiece replica from the 1715 “Alard, Baron Knoop” violin by Antonio Stradivari. This version is 108mm length...
Our classic and timeless “Hill” Style violin pegs in centuries old Mountain Mahogany. The peg heads are 21mm diameter with...
A custom set of Mountain Mahogany “Fleur De Lis” pegs inspired by the “Alard” Nicolo Amati violin of 1649. The...
Our “Ocean Wave” tailpiece, crafted from Mountain Mahogany, shown here cut to a custom length of 109mm for a violin....
Presenting the 'Lionshead' model violin tailpiece (108mm) and a Guarneri-style chinrest, both meticulously handcrafted from flamed southern live oak. The...
A 2023 Daniel Cloutier violin featuring a one-piece curly maple backplate and “Hill” tuning pegs in mountain mahogany.
A 2023 Daniel Cloutier violin featuring a one-piece curly maple backplate and our new “St. Michael the Archangel” tailpiece in...
The “Mother Nature” tailpiece in Mountain Mahogany, cut to length of 108mm for a violin.
A detailed view of the new “Lionshead” tailpiece, depicted here in Mountain Mahogany as carved for a violin.
A close look at a 2023 Daniel Cloutier violin, featuring a two-piece back and an antiqued oil varnish finish.
Classic “Heart” Model pegs in Mountain Mahogany wood with 21mm head and 8.6mm shaft shaved to 7.4mm on Alberti Shavers...
Our new harp-like model tailpieces. You can now choose a Harp-Hill or Harp-French model in any instrument size, length, and...
A fine antiqued oil varnished violin by luthier "Daniel Cloutier" of Hellweg & Cloutier, dated from 2023 No. 2 and outfitted...
This “Daniel Cloutier” violin is outfitted with a Rippleboard fingerboard that relieves hand stress and helps you play in tune...
A set of thick style “Alard” violin pegs in natural Southern Live Oak, with a Tripoli and wax buffed finish....
On this cornerless violin, the high quality Balkan Field maple backplate, with its rays and fleck, cause the varnish to...
Every once in a while we make particularly special fittings sets out of 5,300 year old Royal Fenland Bog Oak....
Daniel Cloutier’s 2017 replica of Guarneri del Gesù’s 1730 “Kreisler” violin, featuring a Mountain Mahogany “Vine Lattice” tailpiece and a...
A close-up of a single thinner version of the “Alard” peg, modeled after Jean-Baptiste Vuillaume’s design from the 1715 “Alard,...